这是一篇未完成的文档

本文是面向基于 MirrorZ 项目镜像站的维护与开发手册，帮助新站长快速上手，了解镜像站的基本操作和维护方法。

需求评估

搭建一个镜像站，最基本的问题有如下几个：

1. 评估是否真的需要一个新的镜像
2. 计划镜像的内容清单
3. 适宜的硬件资源
4. 数据同步管理
5. Web 服务和帮助文档

是否需要新建镜像

Mirroring-Howto

新建镜像一般要瞄准特定的用户群体，典型的例子是校园网、云计算租户网络、软件研发机构内网等。如果没有一定规模的用量，维护一套镜像所带来的人力、管理和资金成本很可能会高于收益，此时建议采用公网镜像并自建缓存（如 HTTP 代理）来提高带宽使用效率和用户体验。常见的代理软件有 Squid、Apache TrafficServer 等，针对 Debian/Ubuntu 也有如 apt-cacher-ng 的成套方案。需要注意的是，如果缓存没有正确配置，可能会导致出现严重的使用问题。

计划镜像的内容清单

如果确实需要新建镜像，那么紧接着就是要针对计划镜像的内容做一份清单，这份清单应该按照需求的强烈程度排序。镜像不是越多越好，当规模增加到一定程度后，可能会带来意想不到的维护复杂度，因而导致相应的资源和精力投入并不总是随规模线性增减。

查看 CQMU Mirror Wiki，根据调查，越靠前说明越有需求。

适宜的硬件资源

对镜像的最直观投入是存储和网络，因为镜像站属于重IO业务(disk & network)，通常建议使用实体物理机来承载，以免在虚拟化平台上对其他业务造成影响。

存储容量可以参考 TUNA 镜像站同步状态页给出的各个镜像的大小； 网络接入建议将服务器放在尽量靠近流量主干的位置，或根据具体网络情况和使用需求评估适宜的位置； 为镜像服务器配置适宜的内存，建议采用 ECC 内存，具体容量根据投入大小决定；一个不精确的估算建议：为每TB镜像数据配置至少1GB内存，并额外配置若干内存用于数据同步等任务。

ECC memory check.sh

sudo dmidecode --type memory | grep -i "Error Correction"

## if Error Correction Type: Multi-bit ECC, it's ECC; Vice versa.

数据同步管理

镜像站需要通过从外部进行数据同步来保持更新，因此如何管理和调度这些任务也成为了一个问题：

当镜像数量较少时，可使用 cron 或 systemd timers 的简单方式管理，易于理解和维护 镜像数量较多时，需要使用更复杂的调度器，如 tunasync 有几种明确 不建议 的做法：

• 将许多同步任务定时到同时启动，或安排在非常相近的时刻；这会导致上游和本地服务器均出现 io 瓶颈，显著降低同步效率和成功率； 两次同步间隔过短，绝大多数镜像建议每天同步 1-2 次，最多不超过 4 次；主要的上游源都不会更新过于频繁，更短的间隔不能明显提升时效性； 使用循环脚本，依次不停地尝试同步每个镜像；除上述效率原因外，这样做会浪费上游同步服务器资源，可能导致IP地址被封禁。 以下做法应务必避免
  • 定时启动同步任务，并且同步命令没有超时的时间限制。
  • 在这种情况下，如果出现网络问题，则会导致已经执行的同步命令还未终止时，再次执行同步命令，长此以往将会积累较多的卡住的同步进程。一旦网络恢复，这些卡住的同步进程则会出现巨量的网络流量，阻塞网络。代替地，应该在同步任务结束一定时间间隔后启动下一次同步任务，而不是定时启动；或者限制同步命令的执行时间，确保在出现故障的情况下，同步命令可以在合理的时间内终止。

参考：

使用较少的镜像源时，使用 systemd timers 进行管理

时间调度设计

/etc/systemd/system/mirror-sync.timer

[Unit]
Description=Daily mirror sync with randomized delay

[Timer]
OnCalendar=*-*-* 03:00:00     # 每天凌晨3点触发
RandomizedDelaySec=1h         # 随机延迟0-1小时（避免同时启动）
Persistent=true               # 补执行错过任务

[Install]
WantedBy=timers.target

任务执行控制

/usr/local/bin/sync-mirrors.sh

#!/bin/bash
TIMEOUT=3600  # 1小时超时

for repo in $(list-your-repos); do
  timeout $TIMEOUT rsync -az --delete rsync://upstream/$repo /mirror/$repo
  [ $? -eq 124 ] && echo "Timeout: $repo" >> /var/log/mirrorsync.err
done

监控建议

/etc/systemd/system/mirror-sync.service

[Service]
Type=oneshot
ExecStart=/usr/local/bin/sync-mirrors.sh
LogLevelMax=warning  # 抑制成功日志

Web 服务和用户界面

一个简单的 Web 服务器软件（例如 TUNA 使用的 Nginx），将所有有关文件设置好路径提供下载，就可以实现最基本的镜像站功能。镜像站绝大多数业务均为静态文件服务，因此类似的高性能静态文件 Web 服务器软件均可按需选择，不建议使用不常见的或过于侧重动态业务的 Web 服务器软件，如 SimpleHTTPServer、Tomcat 等。

如果希望用户界面更加友好，可以在主页前端、目录索引等功能上进行界面改进，可以参考如下几个项目：

• TUNA 镜像的前端页面：https://github.com/tuna/mirror-web
• USTCLUG 的镜像前端页面：https://git.lug.ustc.edu.cn/mirrors/mirrors-index
• 目录索引美化的 ngx-fancyindex

此外，还有镜像的使用帮助，可以参考：

• TUNA 的使用帮助：https://github.com/tuna/mirror-web/tree/master/help/_posts
• USTCLUG 的使用帮助：https://github.com/ustclug/mirrorhelp

MirrorZ 项目

清华大学开源的MirrorZ项目为国内镜像提供了一种开源、高效的镜像同步方案，包含前端项目和后端同步脚本，极大便利了各高校和组织的镜像服务。

测速脚本

MirrorZ 项目提供了测速脚本，帮助用户选择合适的镜像源。测速脚本会自动检测当前网络环境，并根据用户的需求选择合适的镜像源。

运行方式

linux安装curl后，执行shell脚本

curl https://mirrors.cernet.edu.cn/oh-my-mirrorz.py | python3

源文件

#!/usr/bin/env python3
# -*- coding: utf-8 -*-
# vim: expandtab ts=4 sts=4 sw=4

import subprocess
import urllib.request
import json
import os
import argparse

VERSION = '20250426'
CURL_VERSION = ''
UA_URL = 'https://mirrorz.org'

big = {
    'centos': '/7/isos/x86_64/CentOS-7-x86_64-Everything-2009.iso',
    'centos-vault': '/6.0/isos/x86_64/CentOS-6.0-x86_64-LiveDVD.iso',
    'opensuse': '/distribution/leap/15.5/iso/openSUSE-Leap-15.5-DVD-x86_64-Media.iso',
    'ubuntu-releases': '/22.04/ubuntu-22.04.3-desktop-amd64.iso',
    'debian-cd': '/current/amd64/iso-bd/debian-edu-12.1.0-amd64-BD-1.iso',
    'kali-images': '/kali-2023.2/kali-linux-2023.2-live-amd64.iso',
    'CTAN': '/systems/texlive/Images/texlive.iso',
    'blackarch': '/iso/blackarch-linux-full-2023.04.01-x86_64.iso',
    'archlinux': '/iso/latest/archlinux-x86_64.iso',
    'ubuntu': '/indices/md5sums.gz',
    'debian': '/ls-lR.gz',
}

# filled by CI
mirrors = ["https://mirrorz.org/static/json/legacy/tuna.json","https://mirrorz.org/static/json/legacy/bfsu.json","https://mirrorz.org/static/json/legacy/bjtu.json","https://mirrorz.org/static/json/legacy/njupt.json","https://mirrorz.org/static/json/legacy/cqu.json","https://mirrorz.org/static/json/legacy/hit.json","https://mirrorz.org/static/json/legacy/nju.json","https://mirrorz.org/static/json/legacy/neusoft.json","https://mirrorz.org/static/json/legacy/pku.json","https://mirrorz.org/static/json/legacy/ynuosa.json","https://mirrorz.org/static/json/legacy/xjtu.json","https://mirrorz.org/static/json/legacy/xtom.json","https://mirrorz.org/static/json/legacy/xtom-hk.json","https://mirrorz.org/static/json/legacy/xtom-de.json","https://mirrorz.org/static/json/legacy/xtom-nl.json","https://mirrorz.org/static/json/legacy/xtom-ee.json","https://mirrorz.org/static/json/legacy/xtom-jp.json","https://mirrorz.org/static/json/legacy/xtom-au.json","https://mirrorz.org/static/json/legacy/xtom-sg.json","https://mirrorz.org/static/json/legacy/wsyu.json","https://mirrorz.org/static/json/legacy/bupt.json","https://mirrorz.org/static/json/legacy/njtech.json","https://mirrorz.org/static/json/legacy/geekpie.json","https://mirrorz.org/static/json/legacy/qlut.json","https://mirrorz.org/static/json/legacy/nyist.json","https://mirrorz.org/static/json/legacy/jcut.json","https://mirrorz.org/static/json/legacy/nwafu.json","https://mirrors.ustc.edu.cn/static/json/mirrorz.json","https://mirror.sjtu.edu.cn/mirrorz/siyuan.json","https://mirrors.sjtug.sjtu.edu.cn/mirrorz/zhiyuan.json","https://mirrors.sustech.edu.cn/mirrorz/mirrorz.json","https://mirror.iscas.ac.cn/.mirrorz/mirrorz.json","https://linux.xidian.edu.cn/mirrors/status.json","https://mirrors.zju.edu.cn/api/mirrorz.json","https://mirrors.sdu.edu.cn/mirrorz.json","https://mirrors.scau.edu.cn/mirrorz.d.json","https://uestclug.org/mirrors-status/mirrorz.d.json","https://mirror.lzu.edu.cn/.mirrorz.json","https://mirrors.jlu.edu.cn/_api/mirrorz.json","https://mirrors.cqupt.edu.cn/api/mirrorz.json"]

map = {}
res = {}

def check_curl():
    global CURL_VERSION
    try:
        res = subprocess.run(['curl', '--version'], stdout=subprocess.PIPE)
        out = res.stdout.decode('utf-8')
        CURL_VERSION = out.split()[1]
        print(out)
        return 0
    except:
        print("No curl found!")
        return -1

def site_info(url):
    user_agent = 'oh-my-mirrorz/%s (+https://github.com/mirrorz-org/oh-my-mirrorz) %s %s' % (VERSION, UA_URL, "urllib/" + urllib.request.__version__)
    headers = {
        'User-Agent': user_agent
    }

    request = urllib.request.Request(url, headers=headers)
    with urllib.request.urlopen(request, timeout=10) as response:
        return json.loads(response.read().decode('utf-8'))


def speed_test(url, args):
    opt = '-qs'
    if args.ipv4:
        opt += '4'
    elif args.ipv6:
        opt += '6'
    res = subprocess.run(['curl', opt, '-o', os.devnull, '-w', '%{http_code} %{speed_download}',
                          '-m'+str(args.time), '-A', 'oh-my-mirrorz/%s (+https://github.com/mirrorz-org/oh-my-mirrorz) %s curl/%s' % (VERSION, UA_URL, CURL_VERSION), url], stdout=subprocess.PIPE)
    code, speed = res.stdout.decode('utf-8').split()
    return int(code), float(speed)

def human_readable_speed(speed):
    scale = ['B/s', 'KiB/s', 'MiB/s', 'GiB/s', 'TiB/s']
    i = 0
    while (speed > 1024.0):
        i += 1
        speed /= 1024.0
    return f'{speed:.2f} {scale[i]}'

def main():
    parser = argparse.ArgumentParser()
    group = parser.add_mutually_exclusive_group()
    group.add_argument("-4", "--ipv4", help="IPv4 only when speed testing", action="store_true")
    group.add_argument("-6", "--ipv6", help="IPv6 only when speed testing", action="store_true")
    parser.add_argument("-t", "--time", type=int, default=5, choices=[3, 5, 10, 30, 60], help="Duration of a speed test for one mirror (default: %(default)d)")
    args = parser.parse_args()

    if check_curl() != 0:
        exit(-1)
    for url in mirrors:
        try:
            map[url] = site_info(url)
            print('Loaded', map[url]['site']['abbr'], ':', map[url]['site']['url'])
        except:
            print('! Failed to load', url)
            pass

    print() # one empty line to separate metadata and speedtest

    for _, v in map.items():
        uri_list = []
        if 'big' in v['site']:
            uri_list.append(v['site']['big'])
        for r, u in big.items():
            for m in v['mirrors']:
                if m['cname'] == r:
                    uri_list.append(m['url'] + u)
        if len(uri_list) == 0:
            print('! No big file found for', v['site']['abbr'], v['site']['url'])
            continue

        for uri in uri_list:
            res[v['site']['abbr']] = 0
            print('Speed testing', v['site']['abbr'], uri if uri.startswith("http") else v['site']['url'] + uri, '... ', end='', flush=True)
            code, speed = speed_test(v['site']['url'] + uri, args)
            if code != 200:
                print('HTTP Code', code, 'Speed', human_readable_speed(speed))
            else:
                print(human_readable_speed(speed))
                res[v['site']['abbr']] = speed
                break

    print() # one empty line to separate speedtest and result

    print('RANK', 'ABBR', 'SPEED', sep='\t\t')
    for i, (k, v) in enumerate(sorted(res.items(), key = lambda x: x[1], reverse=True)):
        print(f'{i:02d}:', k, human_readable_speed(v), sep='\t\t')

if __name__ == '__main__':
    main()

镜像源上游

镜像源上游是指镜像源的原始数据来源，通常是一个或多个官方源。镜像源会定期从这些上游源同步数据，以确保提供最新的软件包和更新。

MirrorZ mirrors

在测速后，CQMU Mirror选择使用 NYISY USTC CQU TUNA BFSU QLUT 作为上游镜像。为了避免误差，还使用了不同运营商但同在校园网下的工作室服务器。

测速对比测试：工作室服务器/学校内网

构建前的准备工作

前置知识

• 计算机网络基础
• Linux中级知识
• VMware等虚拟化技术
• Python基础、SQL基础、前端基础
• Redis缓存及其集群控制
• 信息安全管理
• 硬盘分区及引导设置

测试环境

操作系统：CentOS Stream9-20250414

安装与配置SSH链接

在实际的操作系统控制中，大多数情况是在内网环境下进行操作，SSH连接是最常用的远程连接方式。

SSH连接参考这里。

配置CentOS Stream软件包镜像

注

这里是 CERNET教育网联合镜像配置，阿里云/腾讯云/华为云等类似，请自行参考相关文档。

CentOS Stream 9 默认启用了包管理工具 dnf，其是 yum 包管理工具的替代品。dnf 与 yum 大部分的命令都是通用的，dnf 也使用 /etc/yum.repos.d/ 进行镜像配置。

CentOS Stream 9 中源被整合入两个文件 centos.repo 和 centos-addons.repo，由于文件中不包含 baseurl 字段，需要手动插入，通过文本替换修改源的方法较为复杂，也可以选择直接复制最后的替换结果覆盖源文件。

将这段代码保存为一个文件，例如 update_mirror.pl。

/tmp/update mirror.pl

#!/usr/bin/perl

use strict;
use warnings;
use autodie;

my $mirrors = 'https://mirrors.cernet.edu.cn/centos-stream';

if (@ARGV < 1) {
    die "Usage: $0 <filename1> <filename2> ...\n";
}

while (my $filename = shift @ARGV) {
    my $backup_filename = $filename . '.bak';
    rename $filename, $backup_filename;

    open my $input, "<", $backup_filename;
    open my $output, ">", $filename;

    while (<$input>) {
        s/^metalink/# metalink/;

        if (m/^name/) {
            my (undef, $repo, $arch) = split /-/;
            $repo =~ s/^\s+|\s+$//g;
            ($arch = defined $arch ? lc($arch) : '') =~ s/^\s+|\s+$//g;

            if ($repo =~ /^Extras/) {
                $_ .= "baseurl=${mirrors}/SIGs/\$releasever-stream/extras" . ($arch eq 'source' ? "/${arch}/" : "/\$basearch/") . "extras-common\n";
            } else {
                $_ .= "baseurl=${mirrors}/\$releasever-stream/$repo" . ($arch eq 'source' ? "/" : "/\$basearch/") . ($arch ne '' ? "${arch}/tree/" : "os") . "\n";
            }
        }

        print $output $_;
    }
}

然后，在命令行中使用以下命令来执行它：

sudo perl /tmp/update_mirror.pl /etc/yum.repos.d/centos*.repo

安装 autodie Perl 模块

这个错误表明你的系统缺少 Perl 模块 autodie，导致 /tmp/update_mirror.pl 脚本无法运行。以下是解决方法：

Can't locate autodie.pm in @INC (you may need to install the autodie module) (@INC contains: /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /tmp/update_mirror.pl line 5. BEGIN failed--compilation aborted at /tmp/update_mirror.pl line 5.

sudo dnf install perl-autodie

重建缓存

sudo dnf clean all && sudo dnf makecache

重要

注意，如果需要启用其中一些 repo，需要将其中的 enabled=0 改为 enabled=1。

注：截至 2023-05-16，并未在官方源与镜像源中发现 nfv-source，建议不要开启 nfv-source。

验证

看到是baseurl是 https://mirrors.cernet.edu.cn/centos-stream/ 即可

centos.repo

cat /etc/yum.repos.d/centos.repo

centos-addons.repo

cat /etc/yum.repos.d/centos-addons.repo

镜像站架构

网络架构

镜像站点是异构的。单个镜像难以提供所有镜像，因此会出现差异。对于终端用户来说，这不是一个好的体验，因为他们需要搜索可用的镜像。为了简化操作，MirrorZ 旨在包含所有镜像，因此需要一个统一的界面。

也就是说，如果你想你的镜像站点在 MirrorZ 上显示，你需要提供一个 JSON 文件，包含你镜像站点的基本信息和镜像列表。你可以使用 mirrorz.json 作为模板，修改其中的内容来适应你的镜像站点。

数据结构由 mirrorz.json 定义：

mirrorz.json

{
  "version": 1.7,
  "site": {
    "url": "https://example.org",
    "logo": "https://example.org/img/logo.svg",
    "logo_darkmode": "https://example.org/img/logo-white.svg",
    "abbr": "EXAMPLE",
    "name": "样例镜像站",
    "homepage": "https://blog.example.org",
    "issue": "https://github.com/example/issues",
    "request": "https://github.com/example/mirror-request",
    "email": "admin@example.com",
    "group": "QQ: 10086 and/or Telegram @something",
    "disk": "may be any string showing usage of disk, e.g. usage",
    "note": "may be any string; like speed limit or connection limit",
    "big": "/speedtest/1000mb.bin",
    "disable": false
  },
  "info": [
    {
      "distro": "Debian",
      "category": "os",
      "urls": [
        {
          "name": "10.7.0 (amd64, CD installer with xfce)",
          "url": "/debian-cd/current/amd64/iso-cd/debian-10.7.0-amd64-xfce-CD-1.iso"
        }
      ]
    }
  ],
  "mirrors": [
    {
      "cname": "AOSP",
      "desc": "Android 操作系统源代码",
      "url": "/AOSP",
      "status": "S",
      "help": "/help/AOSP/",
      "upstream": "https://android.googlesource.com/mirror/manifest",
      "size": "596G",
      "disable": false
    },
    {
      "cname": "AUR",
      "desc": "Arch Linux 用户软件库",
      "url": "https://aur.tuna.tsinghua.edu.cn",
      "status": "S1612195849X1612196849N",
      "help": "/help/AUR/",
      "upstream": "https://aur.archlinux.org/"
    }
  ]
}

镜像站后端们

得益于LUGers的大力贡献，现在已涌现出许许多多新的后端解决方案，以下是一些比较流行的镜像站后端同步解决方案：

TUNA Sync

使用 worker 和 manager 管理节点

快速入门：

本例中:

• 只镜像elvish项目
• 禁用了https
• 禁用了cgroup支持
• 快速上手

获取最新的TUNA Sync二进制包源文件

curl -O https://github.com/tuna/tunasync/releases/download/v0.9.3/tunasync-v0.9.3-linux-amd64-bin.tar.gz

服务器下不了就自己下用SSH传，版本号可能不一样，自行更改

解压

tar -zxvf tunasync-v0.9.3-linux-amd64-bin.tar.gz

将文件移动到标准二进制目录

sudo mv ~/tunasync ~/tunasynctl /usr/local/bin/

验证

which tunasync tunasynctl  # 应返回 /usr/local/bin/tunasync 等路径

配置

mkdir ~/tunasync_demo
mkdir /tmp/tunasync

编辑~/tunasync_demo/worker.conf

~/tunasync_demo/worker.conf

[global]
name = "test_worker"
log_dir = "/tmp/tunasync/log/tunasync/{{.Name}}"
mirror_dir = "/tmp/tunasync"
concurrent = 10
interval = 120

[manager]
api_base = "http://localhost:12345"
token = ""
ca_cert = ""

[cgroup]
enable = false
base_path = "/sys/fs/cgroup"
group = "tunasync"

[server]
hostname = "localhost"
listen_addr = "127.0.0.1"
listen_port = 6000
ssl_cert = ""
ssl_key = ""

[[mirrors]]
name = "elvish"
provider = "rsync"
upstream = "rsync://rsync.elv.sh/elvish/"
use_ipv6 = false

编辑 ~/tunasync_demo/manager.conf

~/tunasync_demo/manager.conf

debug = false

[server]
addr = "127.0.0.1"
port = 12345
ssl_cert = ""
ssl_key = ""

[files]
db_type = "bolt"
db_file = "/tmp/tunasync/manager.db"
ca_cert = ""

除了 bolt 以外，还支持 badger、leveldb 和 redis 的数据库后端。对于 badger 和 leveldb，只需要修改 db_type。如果使用 redis 作为数据库后端，把 db_type 改为 redis，并把下面的 db_file 设为 redis 服务器的地址： redis://user:password@host:port/db_number

运行

tunasync manager --config ~/tunasync_demo/manager.conf
tunasync worker --config ~/tunasync_demo/worker.conf

本例中，镜像的数据在 /tmp/tunasync/

---

查看同步状态

tunasynctl list -p 12345 --all

tunasynctl 也支持配置文件。配置文件可以放在 /etc/tunasync/ctl.conf 或者 ~/.config/tunasync/ctl.conf 两个位置，后者可以覆盖前者的配置值。

配置文件内容为：

/etc/tunasync/ctl.conf

manager_addr = "127.0.0.1"
manager_port = 12345
ca_cert = ""

安全设置

worker 和 manager 之间用 http(s) 通信，如果你 worker 和 manager 都是在本机，那么没必要使用 https。此时 manager 就不指定 ssl_key 和 ssl_cert，留空；worker 的 ca_cert 留空，api_base 以 http:// 开头。

如果需要加密的通信，manager 需要指定 ssl_key 和 ssl_cert，worker 要指定 ca_cert，并且 api_base 应该是 https:// 开头。

---

work.conf 示例配置

/home/scripts/worker.conf

# /home/scripts in this example points to https://github.com/tuna/tunasync-scripts/

[global]
name = "mirror_worker"
log_dir = "/srv/tunasync/log/tunasync/{{.Name}}"
mirror_dir = "/srv/tunasync"
concurrent = 10
interval = 120

# ensure the exec user be add into `docker` group
[docker]
# in `command provider` can use docker_image and docker_volumes
enable = true

[manager]
api_base = "http://localhost:12345"
token = "some_token"
ca_cert = ""

[cgroup]
enable = false
base_path = "/sys/fs/cgroup"
group = "tunasync"

[server]
hostname = "localhost"
listen_addr = "127.0.0.1"
listen_port = 6000
ssl_cert = ""
ssl_key = ""
[[mirrors]]
name = "adobe-fonts"
interval = 1440
provider = "command"
upstream = "https://github.com/adobe-fonts"
command = "/home/scripts/adobe-fonts.sh"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"
docker_image = "tunathu/tunasync-scripts:latest"


[[mirrors]]
name = "AdoptOpenJDK"
interval = 5760
provider = "command"
command = "/home/scripts/adoptopenjdk.py"
upstream = "https://adoptopenjdk.jfrog.io/adoptopenjdk"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "alpine"
provider = "rsync"
upstream = "rsync://rsync.alpinelinux.org/alpine/"
memory_limit = "256M"

[[mirrors]]
name = "anaconda"
provider = "command"
upstream = "https://repo.continuum.io/"
command = "/home/scripts/anaconda.py --delete"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"
interval = 720
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "apache"
provider = "rsync"
upstream = "rsync://rsync.apache.org/apache-dist/"
use_ipv4 = true
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"

[[mirrors]]
name = "armbian"
provider = "two-stage-rsync"
stage1_profile = "debian"
upstream = "rsync://rsync.armbian.com/apt/"
memory_limit = "256M"

[[mirrors]]
name = "armbian-releases"
provider = "rsync"
stage1_profile = "debian"
upstream = "rsync://rsync.armbian.com/dl/"
memory_limit = "256M"

[[mirrors]]
name = "bananian"
provider = "command"
upstream = "https://dl.bananian.org/"
command = "/home/scripts/lftp.sh"
interval = 1440
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "bioconductor"
provider = "rsync"
upstream = "master.bioconductor.org:./"
rsync_options = [ "--rsh=ssh -i /root/id_rsa -o PasswordAuthentication=no -l sync" ]
exclude_file = "/etc/excludes/bioconductor.txt"
memory_limit = "256M"

[[mirrors]]
name = "blender"
provider = "rsync"
upstream = "rsync://mirrors.dotsrc.org/blender/"
rsync_options = [ "--delete-excluded" ]
exclude_file = "/etc/excludes/blender.txt"
interval = 1440
memory_limit = "256M"

[[mirrors]]
name = "chakra"
provider = "rsync"
upstream = "rsync://rsync.chakralinux.org/packages/"
memory_limit = "256M"

[[mirrors]]
name = "chakra-releases"
provider = "rsync"
upstream = "rsync://rsync.chakralinux.org/releases/"
memory_limit = "256M"

[[mirrors]]
name = "chef"
interval = 1440
provider = "command"
upstream = "https://packages.chef.io/repos"
command = "/home/scripts/chef.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "clickhouse"
interval = 2880
provider = "rsync"
upstream = "rsync://repo.yandex.ru/yandexrepo/clickhouse/"
exclude_file = "/etc/excludes/clickhouse.txt"
memory_limit = "256M"

[[mirrors]]
name = "clojars"
provider = "command"
upstream = "s3://clojars-repo-production/"
command = "/home/scripts/s3.sh"
docker_image = "tunathu/ftpsync:latest"

        [mirrors.env]
        TUNASYNC_S3_ENDPOINT = "https://s3.dualstack.us-east-2.amazonaws.com"
        #TUNASYNC_S3_ENDPOINT = "https://s3.us-east-2.amazonaws.com"
        TUNASYNC_AWS_OPTIONS = "--delete --exclude index.html"

[[mirrors]]
name = "CPAN"
provider = "rsync"
upstream = "rsync://cpan-rsync.perl.org/CPAN/"
memory_limit = "256M"

[[mirrors]]
name = "CRAN"
provider = "rsync"
upstream = "rsync://cran.r-project.org/CRAN/"
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"

[[mirrors]]
name = "CTAN"
provider = "rsync"
upstream = "rsync://mirrors.rit.edu/CTAN/"
memory_limit = "256M"

[[mirrors]]
name = "dart-pub"
provider = "command"
upstream = "https://pub.dev/api"
command = "/home/scripts/pub.sh"
interval = 30
docker_image = "tunathu/pub-mirror:latest"

        [mirrors.env]
        MIRROR_BASE_URL = "https://mirrors.tuna.tsinghua.edu.cn/dart-pub"

[[mirrors]]
name = "debian"
provider = "command"
upstream = "rsync://mirrors.tuna.tsinghua.edu.cn/debian/"
command = "/home/scripts/debian.sh sync:archive:debian"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"
docker_image = "tunathu/ftpsync"
docker_volumes = [
        "/etc/misc/ftpsync-debian.conf:/ftpsync/etc/ftpsync-debian.conf:ro",
        "/log/ftpsync:/home/log/tunasync/ftpsync",
]
        [mirrors.env]
        FTPSYNC_LOG_DIR = "/home/log/tunasync/ftpsync"

[[mirrors]]
name = "docker-ce"
provider = "command"
upstream = "https://download.docker.com/"
command = "timeout 3h /home/scripts/docker-ce.py --workers 10 --fast-skip"
interval = 1440
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "ELK"
interval = 1440
provider = "command"
upstream = "https://packages.elastic.co"
command = "/home/scripts/ELK.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"
        # set environment varialbes
        [mirrors.env]
        WGET_OPTIONS = "-6"

[[mirrors]]
name = "elasticstack"
interval = 1440
provider = "command"
upstream = "https://artifacts.elastic.co/"
command = "/home/scripts/elastic.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "erlang-solutions"
interval = 1440
provider = "command"
upstream = "https://packages.erlang-solutions.com"
command = "/home/scripts/erlang.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "flutter"
interval = 1440
provider = "command"
upstream = "https://storage.googleapis.com/flutter_infra/"
command = "/home/scripts/flutter.sh"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "github-release"
provider = "command"
upstream = "https://api.github.com/repos/"
command = "/home/scripts/github-release.py --workers 5"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"
interval = 720
docker_image = "tunathu/tunasync-scripts:latest"
  [mirrors.env]
  GITHUB_TOKEN = "xxxxx"

[[mirrors]]
name = "gitlab-ce"
interval = 1440
provider = "command"
upstream = "https://packages.gitlab.com/gitlab/gitlab-ce/"
command = "/home/scripts/gitlab-ce.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "gitlab-ee"
interval = 1440
provider = "command"
upstream = "https://packages.gitlab.com/gitlab/gitlab-ee/"
command = "/home/scripts/gitlab-ce.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "gitlab-runner"
interval = 1440
provider = "command"
upstream = "https://packages.gitlab.com/runner/gitlab-runner"
command = "/home/scripts/gitlab-runner.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "grafana"
interval = 1440
provider = "command"
upstream = "https://packages.grafana.com/oss"
command = "/home/scripts/grafana.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "hackage"
provider = "command"
command = "/home/scripts/hackage.sh"
upstream = "https://hackage.haskell.org/"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "homebrew-bottles"
provider = "command"
upstream = "https://homebrew.bintray.com"
command = "/home/scripts/linuxbrew-bottles.sh"
docker_image = "tunathu/homebrew-mirror"
        # set environment varialbes
        [mirrors.env]
        HOMEBREW_REPO = "https://neomirrors.tuna.tsinghua.edu.cn/git/homebrew"

[[mirrors]]
name = "influxdata"
interval = 1440
provider = "command"
upstream = "https://repos.influxdata.com"
command = "/home/scripts/influxdata.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "kali"
provider = "two-stage-rsync"
stage1_profile = "debian"
upstream = "rsync://ftp.nluug.nl/kali/"
rsync_options = [ "--delete-excluded" ] # delete .~tmp~ folders
memory_limit = "256M"

[[mirrors]]
name = "kali-images"
provider = "rsync"
upstream = "rsync://ftp.nluug.nl/kali-images/"
rsync_options = [ "--delete-excluded" ] # delete .~tmp~ folders
memory_limit = "256M"

[[mirrors]]
name = "KaOS"
provider = "rsync"
upstream = "rsync://kaosx.tk/kaos/"
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"

[[mirrors]]
name = "kernel"
provider = "rsync"
upstream = "rsync://rsync.kernel.org/pub/linux/kernel/"
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"

[[mirrors]]
name = "kicad"
provider = "command"
upstream = "s3://kicad-downloads/"
command = "/home/scripts/s3.sh"
docker_image = "tunathu/ftpsync:latest"
        [mirrors.env]
        TUNASYNC_S3_ENDPOINT = "https://s3.cern.ch"
        TUNASYNC_AWS_OPTIONS = "--delete --exclude index.html"

[[mirrors]]
name = "kodi"
provider = "rsync"
upstream = "rsync://mirror.yandex.ru/mirrors/xbmc/"
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"
use_ipv6 = true

[[mirrors]]
name = "kubernetes"
interval = 2880
provider = "command"
upstream = "http://packages.cloud.google.com"
command = "/home/scripts/kubernetes.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "linuxbrew-bottles"
provider = "command"
upstream = "https://linuxbrew.bintray.com"
command = "/home/scripts/linuxbrew-bottles.sh"
docker_image = "tunathu/homebrew-mirror"
        # set environment varialbes
        [mirrors.env]
        RUN_LINUXBREW = "true"
        HOMEBREW_REPO = "https://neomirrors.tuna.tsinghua.edu.cn/git/homebrew"

[[mirrors]]
name = "linuxmint"
provider = "two-stage-rsync"
stage1_profile = "debian"
upstream = "rsync://mirrors.kernel.org/linuxmint-packages/"
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"

[[mirrors]]
name = "lxc-images"
provider = "command"
upstream = "https://us.images.linuxcontainers.org/"
command = "/home/scripts/lxc-images.sh"
docker_image = "tunathu/tunasync-scripts:latest"
interval = 720

[[mirrors]]
name = "lyx"
provider = "command"
upstream = "ftp://ftp.lyx.org/pub/lyx/"
command = "/home/scripts/lftp.sh"
docker_image = "tunathu/tunasync-scripts:latest"
        [mirrors.env]
        TUNASYNC_LFTP_OPTIONS = "--only-newer"

[[mirrors]]
name = "mongodb"
interval = 1440
provider = "command"
upstream = "https://repo.mongodb.org"
command = "/home/scripts/mongodb.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "msys2"
provider = "command"
upstream = "http://repo.msys2.org/"
command = "/home/scripts/lftp.sh"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "mysql"
interval = 30
provider = "command"
upstream = "https://repo.mysql.com"
command = "/home/scripts/mysql.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"
        # set environment varialbes
        [mirrors.env]
        USE_IPV6 = "1"

[[mirrors]]
name = "nix"
interval = 1440
provider = "command"
upstream = "s3://nix-releases/nix/"
command = "/home/scripts/nix.sh"
docker_image = "tunathu/tunasync-scripts:latest"
        [mirrors.env]
        MIRROR_BASE_URL = 'https://mirrors.tuna.tsinghua.edu.cn/nix/'

[[mirrors]]
name = "nix-channels"
interval = 300
provider = "command"
upstream = "https://nixos.org/channels"
command = "timeout 20h /home/scripts/nix-channels.py"
docker_image = "tunathu/nix-channels:latest"
docker_options = [
  "--cpus", "20",
  ]

[[mirrors]]
name = "nodesource"
provider = "command"
upstream = "https://deb.nodesource.com/"
command = "/home/scripts/nodesource.sh"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "openresty"
provider = "command"
upstream = "https://openresty.org/package/"
command = "/home/scripts/lftp.sh"
docker_image = "tunathu/tunasync-scripts:latest"

        [mirrors.env]
        TUNASYNC_LFTP_OPTIONS = "--only-newer"

[[mirrors]]
name = "packagist"
provider = "command"
upstream = "http://packagist.org/"
command = "/home/scripts/packagist.sh"
interval = 1440
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "proxmox"
interval = 1440
provider = "command"
upstream = "http://download.proxmox.com"
command = "/home/scripts/proxmox.sh"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "pypi"
provider = "command"
upstream = "https://pypi.python.org/"
command = "/home/scripts/pypi.sh"
docker_image = "tunathu/bandersnatch:latest"
interval = 5

[[mirrors]]
name = "qt"
provider = "rsync"
upstream = "rsync://master.qt-project.org/qt-all/"
exclude_file = "/etc/excludes/qt.txt"
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"

[[mirrors]]
name = "raspberrypi"
provider = "two-stage-rsync"
stage1_profile = "debian"
upstream = "rsync://apt-repo.raspberrypi.org/archive/debian/"
memory_limit = "256M"

[[mirrors]]
name = "raspbian-images"
interval = 5760
provider = "command"
upstream = "https://downloads.raspberrypi.org/"
command = "/home/scripts/lftp.sh"
docker_image = "tunathu/tunasync-scripts:latest"

        [mirrors.env]
        TUNASYNC_LFTP_OPTIONS = "-x ^icons/$ -c --only-missing -v --no-perms"

[[mirrors]]
name = "raspbian"
provider = "two-stage-rsync"
stage1_profile = "debian"
upstream = "rsync://archive.raspbian.org/archive/"
rsync_options = [ "--delete-excluded" ] # delete .~tmp~ folders
memory_limit = "256M"


[[mirrors]]
name = "redhat"
provider = "rsync"
upstream = "rsync://ftp.redhat.com/redhat/"
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"
exclude_file = "/etc/excludes/redhat.txt"
interval = 1440

        [mirrors.env]
        RSYNC_PROXY="127.0.0.1:8123"


[[mirrors]]
name = "remi"
interval = 1440
provider = "command"
upstream = "rsync://rpms.remirepo.net"
command = "/home/scripts/remi.sh"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "repo-ck"
provider = "command"
upstream = "http://repo-ck.com"
command = "/home/scripts/repo-ck.sh"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "ros"
provider = "rsync"
upstream = "rsync://mirror.umd.edu/packages.ros.org/ros/"
memory_limit = "256M"

[[mirrors]]
name = "ros2"
interval = 1440
provider = "command"
upstream = "http://packages.ros.org/ros2"
command = "/home/scripts/ros2.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "rubygems"
provider = "command"
upstream = "https://rubygems.org"
command = "/home/scripts/rubygems.sh"
docker_image = "tunathu/rubygems-mirror"
interval = 60
        # set environment varialbes
        [mirrors.env]
        INIT = "0"

[[mirrors]]
name = "rudder"
interval = 2880
provider = "command"
upstream = "https://repository.rudder.io"
command = "/home/scripts/rudder.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"


[[mirrors]]
name = "rustup"
provider = "command"
upstream = "https://rustup.rs/"
command = "/home/scripts/rustup.sh"
interval = 1440
docker_image = "tunathu/rustup-mirror:latest"
docker_volumes = [
]
docker_options = [
]
        [mirrors.env]
        MIRROR_BASE_URL = "https://mirrors.tuna.tsinghua.edu.cn/rustup"

[[mirrors]]
name = "saltstack"
interval = 1440 # required on http://repo.saltstack.com/#mirror
provider = "command"
upstream = "s3://s3/"
command = "/home/scripts/s3.sh"
docker_image = "tunathu/ftpsync:latest"

        [mirrors.env]
        TUNASYNC_S3_ENDPOINT = "https://s3.repo.saltstack.com"
        TUNASYNC_AWS_OPTIONS = "--delete --exact-timestamps"

[[mirrors]]
name = "solus"
provider = "rsync"
upstream = "rsync://mirrors.rit.edu/solus/"
rsync_options = [ "--exclude", "/shannon", "--exclude", "/unstable" ]
memory_limit = "256M"


[[mirrors]]
name = "stackage"
provider = "command"
command = "/home/scripts/stackage.py"
upstream = "https://www.stackage.org/"
docker_image = "tunathu/tunasync-scripts:latest"
        # set environment varialbes
        [mirrors.env]
        GIT_COMMITTER_NAME = "TUNA mirrors"
        GIT_COMMITTER_EMAIL = "mirrors@tuna.tsinghua.edu.cn"


[[mirrors]]
name = "steamos"
interval = 1440
provider = "command"
upstream = "http://repo.steampowered.com"
command = "/home/scripts/lftp.sh"
docker_image = "tunathu/tunasync-scripts:latest"

        [mirrors.env]
    TUNASYNC_LFTP_OPTIONS = "--only-newer --exclude icons/ "

[[mirrors]]
name = "termux"
interval = 1440
provider = "command"
upstream = "https://dl.bintray.com/termux/termux-packages-24/"
command = "/home/scripts/termux.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "ubuntu"
provider = "two-stage-rsync"
stage1_profile = "debian"
upstream = "rsync://archive.ubuntu.com/ubuntu/"
rsync_options = [ "--delete-excluded" ]
memory_limit = "256M"

[[mirrors]]
name = "ubuntu-ports"
provider = "two-stage-rsync"
stage1_profile = "debian"
upstream = "rsync://ports.ubuntu.com/ubuntu-ports/"
rsync_options = [ "--delete-excluded" ]
exclude_file = "/etc/excludes/ubuntu-ports-exclude.txt"
memory_limit = "256M"

[[mirrors]]
name = "virtualbox"
interval = 1440
provider = "command"
upstream = "http://download.virtualbox.org/virtualbox"
command = "/home/scripts/virtualbox.sh"
size_pattern = "size-sum: ([0-9\\.]+[KMGTP])"
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "winehq"
provider = "command"
upstream = "ftp://ftp.winehq.org/pub/"
command = "/home/scripts/lftp.sh"
docker_image = "tunathu/tunasync-scripts:latest"

        [mirrors.env]
        TUNASYNC_LFTP_OPTIONS = "-x wine-builds.old/ -x /\\..+"

[[mirrors]]
name = "zabbix"
provider = "rsync"
upstream = "rsync://repo.zabbix.com/mirror/"
rsync_options = [ "--delete-excluded", "--chmod=o+r,Do+x,Fa-x" ]
memory_limit = "256M"

[[mirrors]]
name = "AOSP"
interval = 720
provider = "command"
command = "/home/tunasync-scripts/aosp.sh"
upstream = "https://android.googlesource.com/mirror/manifest"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"
docker_image = "tunathu/tunasync-scripts:latest"
        [mirrors.env]
        REPO = "/usr/local/bin/aosp-repo"
        REPO_URL = "https://mirrors.tuna.tsinghua.edu.cn/git/git-repo"
        USE_BITMAP_INDEX = "1"

[[mirrors]]
name = "lineageOS"
interval = 720
provider = "command"
command = "/home/tunasync-scripts/aosp.sh"
upstream = "https://github.com/LineageOS/mirror"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"
docker_image = "tunathu/tunasync-scripts:latest"
        [mirrors.env]
        REPO = "/usr/local/bin/aosp-repo"
        REPO_URL = "https://mirrors.tuna.tsinghua.edu.cn/git/git-repo"
        USE_BITMAP_INDEX = "1"

[[mirrors]]
name = "chromiumos"
interval = 720
provider = "command"
command = "/home/tunasync-scripts/cros.sh"
upstream = "https://chromium.googlesource.com"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"
fail_on_match = "fatal: "
docker_image = "tunathu/tunasync-scripts:latest"
        [mirrors.env]
        USE_BITMAP_INDEX = "1"
        CONCURRENT_JOBS = "20"

[[mirrors]]
name = "crates.io-index.git"
provider = "command"
command = "/home/tunasync-scripts/git.sh"
upstream = "https://github.com/rust-lang/crates.io-index.git"
docker_image = "tunathu/tunasync-scripts:latest"
size_pattern = "size-pack: ([0-9\\.]+[KMGTP])"

[[mirrors]]
name = "flutter-sdk.git"
provider = "command"
command = "/home/tunasync-scripts/git.sh"
upstream = "git://github.com/flutter/flutter.git"
docker_image = "tunathu/tunasync-scripts:latest"
size_pattern = "size-pack: ([0-9\\.]+[KMGTP])"

[[mirrors]]
name = "gcc.git"
provider = "command"
command = "/home/tunasync-scripts/git.sh"
upstream = "git://gcc.gnu.org/git/gcc.git"
docker_image = "tunathu/tunasync-scripts:latest"
size_pattern = "size-pack: ([0-9\\.]+[KMGTP])"

[[mirrors]]
name = "gentoo-portage.git"
provider = "command"
command = "/home/tunasync-scripts/git.sh"
upstream = "git://github.com/gentoo-mirror/gentoo.git"
docker_image = "tunathu/tunasync-scripts:latest"
size_pattern = "size-pack: ([0-9\\.]+[KMGTP])"

[[mirrors]]
name = "git-repo"
provider = "command"
command = "/home/tunasync-scripts/git-repo.sh"
upstream = "https://gerrit.googlesource.com/git-repo"
size_pattern = "size-pack: ([0-9\\.]+[KMGTP])"
fail_on_match = "fatal: "
docker_image = "tunathu/tunasync-scripts:latest"

[[mirrors]]
name = "homebrew"
provider = "command"
command = "/home/tunasync-scripts/homebrew.sh"
upstream = "https://github.com/Homebrew"
docker_image = "tunathu/tunasync-scripts:latest"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"

[[mirrors]]
name = "CocoaPods"
provider = "command"
command = "/home/tunasync-scripts/cocoapods.sh"
upstream = "https://github.com/CocoaPods"
docker_image = "tunathu/tunasync-scripts:latest"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"

[[mirrors]]
name = "pybombs"
interval = 720
provider = "command"
command = "/home/tunasync-scripts/pybombs.sh"
upstream = "https://github.com/scateu/pybombs-mirror/"
docker_image = "tunathu/tunasync-scripts:latest"
docker_volumes = ["/home/pybombs-mirror:/opt/pybombs-mirror"]
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"
        [mirrors.env]
        PYBOMBS_MIRROR_SCRIPT_PATH = "/opt/pybombs-mirror"
        MIRROR_BASE_URL = "https://mirrors.tuna.tsinghua.edu.cn/pybombs"

[[mirrors]]
name = "llvm"
provider = "command"
command = "/home/tunasync-scripts/llvm.sh"
upstream = "https://git.llvm.org/git"
docker_image = "tunathu/tunasync-scripts:latest"
size_pattern = "Total size is ([0-9\\.]+[KMGTP]?)"

# vim: ft=toml

USTCLUG YUKI

中国科学技术大学Linux用户组开发的Go语言控制后端

镜像站前端们

TUNA Mirror Web

1. 安装 Ruby

sudo dnf install ruby ruby-devel

验证

ruby --version

2. 安装Node.js

dnf install git

NodeJS Releases多个版本管理器

https://help.mirrors.cernet.edu.cn/nodejs-release/

https://nodejs.org/en/download

nvm.sh

export NVM_DIR="$HOME/.nvm" && (
  git clone https://github.com/nvm-sh/nvm.git "$NVM_DIR"
  cd "$NVM_DIR"
  git checkout `git describe --abbrev=0 --tags --match "v[0-9]*" $(git rev-list --tags --max-count=1)`
) && \. "$NVM_DIR/nvm.sh"

fnm.sh

# Download and install fnm:
curl -o- https://fnm.vercel.app/install | bash
# Download and install Node.js:
fnm install 22
# Verify the Node.js version:
node -v # Should print "v22.15.0".
# Verify npm version:
npm -v # Should print "10.9.2".

ZJU Mirror

浙江大学的前端编写较为复杂，针对HTTP请求设置代理检测、IP检测与请求头（浏览器）检测，安全性高。由专业UI设计师和前端开发组成，设计恰当。

CQMU Mirror大部分灵感来自于此，查看前端仓库与开发方法。

SDU Mirror

由山东大学开发的镜像站前端页面，组件自行封装，简约大气。

SUSTech-CRA ccse-mirror-web

南方科技大学镜像站前端是基于Vue3编写的，相对容易上手，而且开发指南清晰易懂，不再赘述。

CQU Mirror

重庆大学使用NuxtJS自行构建开发的镜像站前端界面，小清新。

XJTUANA Mirror

西安交通大学软件镜像站

CQUPT Mirror

重庆邮电大学开发的前端也是基于Vue3编写的，对我们学校大二、大三动手能力强的同学比较友好，可以看看，启动与开发也十分简单

1. 导入git仓库

git clone

2. 安装pnpm

npm install -g pnpm

3. 安装依赖

pnpm install

4. 预览

pnpm dev

技术选型之前端

fancy-ngx

负载均衡器

框架技术与静态生成

技术选型之后端

反向代理

负载均衡

RAID磁盘阵列

RaidZ2

OSS对象存储

HTTP缓存

Redis集群

贡献者

codingLab